Adaptor kits convert clamping ring drains to an integrated bonding flange
- Adaptor kits are used when the clamping ring drain cannot be removed
- Kit includes a stainless steel adaptor ring with an over-molded rubber gasket and a variety of perforated hole patterns that align with most common clamping ring shower drains
- The adaptor ring replaces the clamping ring and is attached to the drain body using the clamping ring bolts
- Connection is made watertight via the rubber gasket and KERDI-FIX adhesive/sealant
- Suitable for both KERDI-SHOWER-T/-TS/-TT shower tray and mortar bed applications
- Available in ABS
- Adaptor ring: Ⓓ Schluter-Systems L.P., U.S. patent No. D593,641, other patents pending
Schluter®-KERDI-DRAIN is a floor drain specifically designed to allow connections to Schluter®-KERDI or other load-bearing, bonded waterproof membranes. The membrane is adhered to the large integrated bonding flange to form a waterproof connection at the top of the drain assembly. KERDI-DRAIN consists of a drain casing and fully adjustable grate assembly or covering support to which tile is applied. The grate assembly accommodates a wide range of tile thicknesses and allows lateral and tilt adjustment as well. The covering support is placed flush with the top of the bonding flange and can therefore accommodate any thickness tile covering.
The KERDI-DRAIN adaptor kits are designed to convert clamping ring drains by equipping them with an integrated bonding flange. The adaptor kits include a stainless steel adaptor ring with an over-molded rubber gasket and a variety of perforated hole patterns that align with most common clamping ring shower drains. The adaptor ring replaces the clamping ring and is attached to the drain body using the clamping ring bolts. This connection is made watertight via the rubber gasket and Schluter®-KERDI-FIX adhesive/sealant. The integrated bonding flange slides into the adaptor ring, with the over-molded rubber gasket ensuring a watertight seal.
KERDI-DRAIN ADAPTOR KITS, available in 5 1/4" (133 mm) and 7 1/2" (191 mm) diameter sizes, are used to convert traditional clamping ring drains to integrated bonding flange drains when removal of the clamping ring drain is not practical (e.g. when they are set in concrete slabs). Adaptor kits are suitable for both mortar beds and KERDI-SHOWER-T/-TS/-TT shower tray applications.
The grates are installed in conjunction with a height adjustment collar or lateral adjustment ring, which are made of ABS to allow for simple and convenient adjustment when setting the tile. Drain grates are available in stainless steel with a polished or oil-rubbed bronze finish and in anodized aluminum with a brushed copper, brushed brass, or brushed nickel finish. The polished stainless steel grates are available in 4" (100 mm) -square, 6" (150 mm) -square and -round versions. All other grates are available in the 4" (100 mm) -square version only. The tileable covering support is a 4" (100 mm) -square stainless steel plate with Schluter®-KERDI laminated on the surface to allow for bonding of ceramic or stone tile, which creates a virtually invisible drainage line. Please note: Grate assemblies included with the plastic KERDI-DRAIN featuring 3" (75 mm) outlets and the residential adaptor kits only allow vertical and tilt adjustment (no lateral adjustment). Also, the tileable grate and the 6" round or square grates are not compatible with the 5 ¼” adaptor ring flange.